|
Materials: Screws &
Cylinders are made of alloy steels [ EN-24 for hardened /
EN-41B for nitrided screw & cylinder ] Surface treated
Screws and Cylinders can operate at the high
temperature/high pressure conditions prevalent in the
extruder. The highest grade of materials are used for
fabricating the machinery.
Design: Screw is designed according to the material
required to be processed. Cylinders are provided with ample
thickness to withstand internal pressure as well as regular
wear and tear. A 3 part heavy Cast Iron Assembly fitted with
3 heavy-duty bearings provides smooth operation of the
extruder. External Greasing points provide for easy
maintenance. A specially designed stand ensures that there
is minimum vibration even when operating the extruder at its
maximum rated speed. The extruder is powered by a set of
standard motor and gearbox, which are properly aligned to
provide maximum efficiency.
Temperature Control: The Control Cabinet provided
with an automatic cut-off system regulates the temperature
of the cylinders through the use of good quality heaters and
thermocouples. Blowers are additionally provided on
extruders requiring more accurate temperature control.
Dies: The Dies of the extruder are designed according
to the specific requirements of the customer. Extruders can
be manufactured for the following applications:
Reprocessing / Recycling Plant
Blow Film Plant
Profiles [ Casing - Capping, Symmetrical Profiles ]
Pipe Plant [ PVC, LDPE, LLDPE, HDPE ] |
