|
Body: Made
according to requirements; either of M.S. or S.S. or M.S.
with S.S. lining. Rubber padding is provided between the
body and the lid to prevent metal to metal contact and
escape of material. Body can be water jacketed from the
outside if required so that material can be quickly cooled
avoiding formation of lumps.
Housing: Houses the shaft fitted with the mixer
blades. Consists of two heavy-duty bearings. Water cooling
on housing helps to keep the temperature down to a minimum
even at the high operating speed.
Blades: Made either of M.S. or S.S. according to
requirement. Proper mixing is achieved by correct
positioning of the two blades.
Motor:
Mixer is fitted with a 15 hp or 20 hp motor according to
requirement.
Output:
A batch of 25 kgs can be processed in about 7 minutes. |
