|
Rotor:
Made from Mild Steel and accurately machined to enable
Dynamic Balancing.
Blades: Are H.C.H.C.
(High Carbon High Chromium) tipped with a hardness of 60 on
the Rockwell C Scale. High-tension bolts are used for
fitting blades. Rotor Blades can be adjusted relative to the
fixed blade so as to provide for uniform cutting throughout
the pelletizing operation.
Side Parts: Made from
Mild Steel and securely bolted to the Pelletizer Stand. The
Rotor is fitted between the side parts by means of a shaft
bearing assembly. The bearing housings for the feed/guide
rolls are housed in the Side parts.
Guide Rolls: Made of
alloy steel and spring tension loaded to grip the strands
with uniform pressure. The guide roll can be lifted by an
attached lever mechanism.
Drive: Power is provided
through a motor mounted internally on the pelletizer stand.
The drive unit is capable of variable speeds through the use
of stepped pulleys.
|
Model |
RP-6 |
RP-8 |
RP-10/6 |
RP-10/8 |
RP-10/10 |
|
Length of Rotor |
6" |
8" |
10" |
10" |
10" |
|
No. of Blades on
Rotor |
six |
six |
six |
eight |
ten |
|
No. of Fixed
Blades |
one |
one |
one |
one |
one |
|
Speed Range |
640 - 1234 rpm |
640 - 1234 rpm |
640 - 1234 rpm |
640 - 1234 rpm |
640 - 1234 rpm |
|
H.P. of Motor
Drive |
1/2 H.P. |
1
H.P. |
2
H.P. |
2
H.P. |
3
H.P. |
|
No. of Strands
(maximum) |
9 |
12 |
14 |
16 |
20 |
Pelletizing
Capacity |
20-30 kg/hr |
30-75 kg/hr |
40-100 kg/hr |
100-150 kg/hr |
150-200 kg/hr |
|
